oraimo SpaceBuds Hybrid ANC True Wireless Earbuds Customized Voice Prompt

Step 2: Attempt to charge a different device using the same charger and cable. If the other device also fails to charge, the issue may be with the charger or cable, and they may need to be replaced.

Step 3: Try charging the case with an alternative charger and cable. If the case still does not charge, it is possible that the case itself is defective. Please send it to us and arrange the replacement as soon as Possible.

Step 2: Change your location to check for potential interference, or test the earbuds with a different phone to rule out Bluetooth signal issues.

Step 3: Place the earbuds back into the charging case and close it. After 15 seconds, reopen the case and attempt to reconnect the earbuds to your phone.

If these steps do not resolve the issue, consider resetting the earbuds to their factory settings.

Step 2: Adjust the earbud wearing to check whether it will return to normal.

Step 3: Inspect the speaker grilles for obstructions caused by dirt or debris. If present, clean them carefully.

If these steps do not resolve the issue, the earbuds may be defective. Please return them to us to arrange a replacement as soon as possible.

Step 2: Check the earbuds for debris that might be clogging the speaker holes and cleaning them if needed.

If these steps do not resolve the issue, the earbuds may be defective. Please return them to us for a replacement as soon as possible.

Step 2: Check the speaker mesh for blockages from dirt or debris. If found, gently clean it.

Step 3: verify that the volume synchronization feature on your phone is working correctly. For assistance, refer to the document:

Step 2: Make sure SpaceBuds already connected to your device.

Step 3: Check if your phone is mute or the volume is too low. Increase the volume on your phone first, then adjust the earbuds' volume.

Step 4: Check the audio output setting on the device. Reference operating process: Settings → Bluetooth → select the connected device to enter its own Bluetooth setup → switch on "Use For Media audio

If you still experience no sound after these steps, the SpaceBuds may be faulty. Please contact us to arrange a replacement as soon as possible.

Step 2: Clean the charging ports on both the earbuds and the case to remove any debris that might interfere with the connection.

Step 3: To reset the earbuds, double-tap on either earbud and hold until you hear six beeps.

If these steps do not resolve the issue, the earbuds may be defective. Please return them to us, and we will arrange for a replacement promptly.

Step 2: Peel off the protective films on the earbuds and put them into the case to recharge for about 30mins.

Step 3: Erase all Bluetooth names [oraimo SpaceBuds] in the list and re-activate phone Bluetooth.

Step 4: Reset the earbuds: double tap any earbud and hold it till you hear 6 beeps.

Step 5: Search [oraimo SpaceBuds] on your phone.

Step 2: Peel off the protective films on the earbuds and put them into the case to recharge for about 30mins.

Step 3: Open the case lid to observe the indicator light.

(1) Rapid Blinking: This indicates the earbuds are in pairing mode. Please delete any existing [oraimo SpaceBuds] entries from your Bluetooth list and then reactivate your device's Bluetooth feature.

(2) Slow Pulsing: This signifies that the earbuds are currently connected to another device. To reset the earbuds, double-tap any one of them and hold until you hear six beeps.

Step 4: Search [oraimo SpaceBuds] on your device.

Step 2: Check the earbuds for any debris obstructing the speaker hole and clean them if needed.

Step 3: Confirm that the phone's volume is synchronized with the earbuds. For instructions, refer to the beloved instruction

Step 4: Verify the audio output settings on your device: Go to Settings → Bluetooth → select the connected device → enable "Use For Media Audio.

How to turn on phone volume synchronization

In the "Headphone Safety" option of iOS phones, there is a "Reduce Loud Sounds" function. It is turned off by default. However, if you have manually turned it on before, the headphone volume will be limited and cannot reach the maximum volume.There is a function option on Android phones: "Synchronize Bluetooth device volume with mobile phone", and some models are turned off by default. At this time, when adjusting the volume through the mobile phone, you can only adjust the mobile phone volume, and cannot synchronize the headset volume; so There may be a problem that the volume of the mobile phone is adjusted to the maximum, but the sound of the earphones is still too low. Therefore, when you feel that the volume of your Bluetooth headset is low, you can refer to the following operation examples to solve the problem:(Please note that adjusting the phone settings may cause the headphone volume to change suddenly. Do not wear headphones at this time.)

Apple（Example：iOS14.3 Version）Check the path: Settings------Sounds & Haptics---Headphone Safety---Reduce Loud Sounds

HUAWEI /HONOR phone（Example：HUAWEI NOVA 10）：Path: Bluetooth---Sync volume with phone

Xiaomi / Redmi phone（Example：Redmi Neo 5 SE）：Path: Bluetooth---Device volume sync

OPPO phone （Example：OPPO Find X5 pro）Path: Bluetooth---Device volume sync

VIVO phone （Example：VIVO ）The volume synchronization function is turned on by default on this phone. If you are not sure whether you have changed the settings before, please check according to the following path:Path: Enter *#*#7777#*#* on the dial pad to enter the developer options---swipe down to find the "Disable absolute volume " switch---make sure this option is turned off.

Samsung phone（Example：Galaxy F52）The volume synchronization function is turned on by default on this phone. If you are not sure whether you have changed the settings before, please check according to the following path:Path: Settings---About Phone---Software Information---Click "Compilation Number" multiple times (the prompt "You are already in developer mode" will appear below)---Return to Settings---Develop Options---Scroll down to find the "Disable absolute volume function" switch---Please make sure this option is turned off.

MEIZU phone（Example：MEIZU18）Path: Bluetooth---Device volume sync

ZTE phone（Example：ZTE Axon 30 Ultra）The volume synchronization function is turned on by default on this phone. If you are not sure whether you have changed the settings before, please check according to the following path:Settings---About phone---Click Android version number---click "Version number" multiple times (a prompt "You are already in developer mode" will appear below)---Return to settings---System Update---Developer Options---Scroll down to find the "Disable Absolute Volume Function" switch---Please make sure this option is turned off.

SHARK phone（Example：SHARK 3）The volume synchronization function is turned on by default on this phone. If you are not sure whether you have changed the settings before, please check according to the following path:Settings---My Device---All Parameters---Click "Version Number" multiple times (the prompt "You are already in developer mode" will appear below)---Return to Settings---More Settings---Developer Options---Scroll down to find the "Disable Absolute Volume Function" switch----Please make sure this option is turned off.

Nubia phone（Example：nubia  6Pro）The volume synchronization function is turned on by default on this phone. If you are not sure whether you have changed the settings before, please check according to the following path:Settings---About the phone---click "Version Number" multiple times (the prompt "You are already in developer mode" will appear below)---return to settings---advanced settings---developer options ---Scroll down to find the "Disable absolute volume function" switch---Please make sure this option is turned off

Step 2: Insert the earbud into the charging case and check the indicator light. If it illuminates briefly (approximately one second), the earbud’s battery might be completely depleted. Allow it to charge for about one hour.

If the indicator light does not turn on, there may be a poor connection between the earbuds and the charging case. Clean the charging contacts and try charging again.

Should these steps fail to resolve the issue, the earbuds may be faulty. We advise you to return the product to us for a replacement as soon as possible.

Step 2: Open the app, go to the [Lighting Effect] section, and select your desired lighting options.

Step 3: Make sure the earbuds are inside the charging case when attempting to change the lighting effect.

Note: This feature cannot be used if the charging case’s battery is low. If the case’s indicator light is red, charge it until the battery level reaches medium or high before trying to activate the lighting effects.

Step 2: Keep your mouth away from the device's microphone for about 25cm while recording.

Step 3: Ensure that the device's microphone is functioning correctly.

Step 2: Refer to the user manual to locate the specific area near your ear for the wide area tap and follow the provided tapping instructions.

Step 3: If the function still isn’t responding, adjust the fit of the earbuds to ensure they are securely placed in your ear canal.

Step 4: Minimize exposure to activities such as chewing or swallowing, as well as environmental noises, which may interfere with the wide area tap feature.

Step 2: Ensure the eartips fit snugly in your ears for optimal sound pickup.

Step 3: Check the microphone holes for any dirt or blockages and clean them if necessary.

Step 4: Speak slightly louder to see if it improves Smart Chat mode’s responsiveness.

Step 5: Test the functionality by using longer phrases, such as [Hello, oraimo!].

Step 2: Check the touch control settings in the oraimo Sound app. If needed, reset your SpaceBuds by double-tapping any earbud and holding for 3 seconds.

Step 3: Check whether it is wet on your finger and the touching area. Keep your finger and touching area clean and dry before use.

Step 4: If double-tap or triple-tap doesn't work well, try it a little bit faster. (The time gap should be under 600ms)

Step 2: Ensure you have the latest version of the oraimo Sound app installed. Use the app to tap the [Noise Cancellation] button to switch between modes.

If these steps do not resolve the issue, consider resetting your earbuds to their factory settings.

Step 2: Inspect the microphone holes for any blockages caused by dirt. If present, gently clean them with a soft cloth.

Step 3: Ensure the earbuds are worn properly. Position them so that the microphone holes are not pressed against your skin or obstructed.